P A G E
|
5
Wintex Agro, Vilhelmsborgvej 15, DK-7700 Thisted
+45 97990800, [email protected], www.wintexagro.com
Remove the coupling nut with the special key which is delivered together with the soil sampler.
It is now possible to remove the probe.
Coupling nut
Special key
REPLACEMENT OF O-RING
When the probe is removed, it is possible to replace the O-ring.
REPLACEMENT OF SCRAPER
At first force the knurled pin out. Then replace the scraper and replace the old knurled pin
with a new one.
6.
ADJUSTMENT OF CHAIN FOR ROTATION
Loosen the four screws.
Then adjust the chain for rotation by turning the insex bolt (clockwise to tighten the chain, counter-
clockwise to loosen the chain. When the chain is adjusted correctly, the four screws must be tightened
again.
