Tel: 1-800-WINTERS / www.winters.com
WINTERS INSTRUMENTS
8
Service / Repair
Recalibration
During the life-time of a probe, the value of offset and span may shift. As a consequence, a deviating signal value in
reference to the nominal pressure range starting point or end point may be transmitted. If one of these two
phenomena occurs after prolonged use, a recalibration is recommended to ensure furthermore high accuracy.
Return
Before every return of your device, whether for recalibration, decalcification, modifications or repair, it is necessary
to contact us to ensure a fast handling of your request. Please inform us by sending an email to:
[email protected]. Include the number of devices sent and request a RMA. Then clean the device and pack it
shatterproof before send it to Winters Instruments indicating the RMA.
Disposal
The device must be disposed according to the European Directives 2002/96/EG and 2003/108/EG (on waste
electrical and electronic equipment) Waste of electrical and electronic equipment may not be disposed by domestic
refuse!
Y
WARNING!
Depending on the measuring medium, deposit on the device may cause danger for the user and
the environment. Comply with adequate precautions for purification and dispose of it properly.
Warranty conditions
The warranty conditions are subject to the legal warranty period of 1 year from the date of delivery. In case of
improper use, modifications of or damages to the device, we do not accept warranty claims. Damaged diaphragms
will also not be accepted. Fur-thermore, defects due to normal wear are not subject to warranty services.
Declaration of conformity / CE
The delivered device fulfils all legal requirements. The applied directives, harmonised standards and documents are
listed in the EC declaration of conformity, which is available upon request. Additionally, the operational safety is
confirmed by the CE sign on the manufacturing label.
LM3 Installation, Operation Manual