Winters LM3 Installation And Operating Manual Download Page 2

LM3 Installation, Operation Manual

Tel: 1-800-WINTERS / www.winters.com

WINTERS INSTRUMENTS

2

Kalrez

®, 

Viton

®

and Nordel

®

are registered trademarks of DuPont Performance Elastomers

*

Cable with integrated air tube for atmospheric pressure reference

Specifications 

Output Signal

Standard 2-wire: 4-20 mA / Vs = 12-36 Vdc

Accuracy

Standard nominal pressure > 5 psi: <±0.175% FSO BFSL

< 5 psi: <±0.25% FSO BFSL

Optional nominal pressure > 5 psi: <±0.125% FSO BFSL

Permissible Load

Rmax = [(Vs - Vs min) / 0.02] Ohm

Influence Effects

Supply: 0.05% FSO / 10 V
Load: 0.05% FSO / kOhm

Long-term Stability

<±0.1% FSO/yr

Response Time

<10 msec

Permissible Temperatures

Medium: 14°F to 158°F (-10°C to 70°C)
Storage: -13°F to 158°F (-25°C to 70°C)

Reserve Polarity Protection

No damage. No function.

Electromagnetic Compatibility

Emission and immunity according to EN 61326

Electrical Connection

Cable with sheath material*: PVC grey, PUR black, FEP black

Housing

316Ti SS

Seals

FKM (Viton®, Kalrez®) / EPDM (Nordel®)

Diaphragm

316L SS

Weight

100 g (without cable)

Current Consumption

Current: 25 mA max

Connecting Cables

Cable capacitance: Signal line/shield and signal line/signal line: 160 pF/m
Cable inductance: Signal line/shield and signal line/signal line: 1 μH/m

Enclosure Rating

NEMA 6P / IP68

Description and Features:

Slimline probe is especially suited for applications with restricted space

Designed for continuous level measurement in water or other liquids 

with low viscosity

316L SS probe with stainless steel sensor for ease in cleaning

Available ranges from H2O up to 300 psi

±0.175% and ±0.25% accuracy ratings. ±0.125% optional

NEMA 6P / IP68

Approved for outdoor use

Customizable

1 year warranty

Applications:

Ideal for restricted space conditions in level and depth measurement 

applications including ground water and wells

Summary of Contents for LM3











Reviews: