Operation
|
6
|
English
Operating instructions CTR Series
|
89014478; 2020-06
|
33
Instructions for a good wash result
– Do not overload racks, to allow the wash water to reach all dirty surfaces.
– Drench the cutlery until it is rinsed. Do not use any foaming pre-cleaners.
– Space the glasses to prevent them from rubbing against each other. This will avoid scratches.
– For tall glasses, choose a wash rack with appropriate divisions so that the glasses are held in a stable position.
– Do not polish glasses, cutlery and dishes. Germs and bacteria exist even in fresh multi-purpose cloths.
– Wash light objects in a washing cage so that they remain in a stable position. Alternatively, cover the wash rack with a
second coarse mesh wash rack.
Start washing process
Ø
All zones and the rack conveyor are switched on.
ð
Start button turns blue.
Ø
Sort the wash rack correctly and push it into the warewasher.
Remove the wash racks from the outlet roller table
Ø
Remove the wash rack from the outlet roller table before the table limit switch (a) is triggered.
The table limit switch stops the rack conveyor and prevents the drive from being blocked if the wash racks are not re-
moved from the outlet roller table.
Stop washing process
Ø
Press start button.
ð
Start button turns green.
