4
Put out of commission (daily)
Turn selector switch to position "0".
With machines wit.h push-button assembly, switch machine off by pressing "On/Off
button". Light will go out.
Empty the tank by removing the stand pipe. Clean the tank and only after completely
emptying the tank, remove pump sieve and clean thoroughly. Check coarse sieve and
clean if necessary. Insert pump sieve again into the sieve plate.
Clean machine
outside
by means of a soft cloth and an appropriate care aid. We
recommend Winterhalter Stainless Steel Cleaner and Winterhalter Stainless Steel Care
Aid.
ATTENTION!
Machine is not. splash water protected. Do not clean outside with a High-Pressure cleaner.
It is advisable to leave the machine open after cleaning.
5 Special
Instructions
Should the wash water be very soiled after busy periods, it is advisable to drain out the
water and refill the tank.
The pre-dosage of detergent. must also be renewed as described in Point 2.
This does not apply if you have an automatic detergent dispenser.
6
Layout of controls
5 Selector switch
Position "0”
OFF
Position "1"
Manual wash and rinse cycle
can be operated.
Position "2"
Boiler heating in function.
Position "3"
Ready for operation.
All functions of the
machine can be released.
With machines with push-button assembly: by pressing button "0", ready for operation; by
pressing button again, machine "Off".
