The valve to the washtank is automatically shut off when the required water level in the
tank has been reached. Only then will the tank heating element begin to heat the water
to 55 to 60 degrees C as required.
The heating time depends on the temperature of the inflowing water, this takes, with cold
water, between 20 and 40 minutes according to the size of the machine.
Check if there is enough rinse-aid in the rinse-aid container, if necessary re-fill. It is
important that the container never gets quite empty. Each wash cycle takes approx.
1 cm
3
of rinse-aid. The dosing is done automatically by the fitted rinse-aid dispenser.
Add detergents as predose to the hot water tank according to the tank capacity.
Please note that each wash cycle reduces the wash water concentration. Therefore an
additional dosage according to the chart below has to be effected after 10 wash cycles.
When the machine is equipped with the Detergent Sensor Wako 80, the indicator lamp
(12) lights up and shows that additional dosing is necessary.
Approximate quantity of predose and additional dosing of the Winterhalter Gastronom
detergents:
Model
GS
7 10 12 33 34 405
41 61 62 63 71 90 100
Predose
(gr)
50 70 65 100 80 100 100 140 250 900 160 200 370
Additional
dosing
(gr)
65 65 70 65 70 65 65 65 95 210
80 80 130
The blue dispenser, supplied with Winterhalter Gastronom detergents contains approx.
200 gr. of powder. A desertspoonful is approx. 20 gr.
In order to avoid spots in the wash tank, the detergents should be dissolved with warm
water or the machine switched on for a short period. Washing can be started as soon as
the correct temperatures are reached on the thermometers. The white pilot lamp goes
out on machines without a thermometer.
The above does not apply if you have a machine with an automatic detergent dispenser.
