page 3 of 24
Document: U99_001
Glossary
Pressure pipe
Pipe, connected to or to be connected to outlet.
Hydraulics
The so-called hydraulics describes the part of a pump, which converts speed power to pressure power.
Product
A product identifies a pump or a pump aggregate, according to scope of supply.
Pump
Pump with free shaft end, without drive assembly and without electric motor, with or without pump coupling.
Pump aggregate
A pump aggregate consists of the pump with relating drive assembly and electric motor.
Suction pipe
The suction pipe is / will be connected to suction flange.
1.
General
1.1 General Information
This instruction manual refers to WSCA-Pumps stated on cover sheet for the following sizes: 500 & 600
It describes proper handling and use during life cycle of pump/pump unit. Moreover this instruction manual contains basic
safety-related information.
It is absolutely necessary for technical staff to read this manual before starting assembly, before installation and
commissioning before any works done at pump/pump unit. The manual must be always available at site.
For more information, please, apply to manufacturer.
For identification, please state number of manual (U99_001), written at the lower edge of manual.