Wintec WBT-202, User Manual

Page: 24 / 68

21
Device Setting
Ð
Tab: Device Setting Tab. 1.
Password: Key in the password and press “Enable Password” button to authorize the pass- 2.
word mechanism.
1.
2.
5.
3. 4.
6.
NOTE
The password should be 4 digits. 1.
When you want to disable the password protection, just key in nothing in the 2.
blanks of both “New” and “Confi rm” and then click “Change Password” button.
Device Name: Add a device name and press the “Change” button to confi rm it. 3.
Device Info: Key in the device info if any and press “Change” button to confi rm it. 4.
Bluetooth Setting: 5.
When the logging function is DISABLE with unworked Bluetooth and USB interface, the •
WBT-202 will auto turn off after 10 minutes (depend on the time you set).
When the logging function is ENABLED with unworked Bluetooth and USB interface, the
•
Bluetooth function will be switched off automatically.
NOTE
The valid setting is 60~3600 seconds. Please remember pressing the “Set” button 1.
after setting.
The Bluetooth auto turn off function will be shut down when the setting is “0” second.
2.
Shake Mode: Enable or Disable the shake mode function. 6.
When the shake mode on with no movement for 5 minutes (default, depend on the •
duration time you set), WBT-202 will auto turn off and turn on again when it feels vibration.
NOTE
If the WBT-202 is switched off manually under shake mode on, it won’t turn on
again automatically even with movement.