Wintec WBT-202, User Manual

Page: 12 / 68

9
USING THE UNIT
Power On
Press and hold the (Power) button for 3 seconds to turn on the WBT-202.
Ð
The (GPS) & (Bluetooth ) LED will light up and start to search satellites signals.
Ð
If there is no Micro-SD card inside the device, the orange (Micor-SD) LED will light up.
Ð
At this moment, ensure the unit facing to the sky in open sky environments for about a minute
Ð
unit the WBT-202 gets acquisition (Red LED blinks).
Bluetooth On/Off
Press the (Power) button to enable or disable the Bluetooth connection.
Create a new track
Press the (Flag) button longer until the green (GPS) LED goes out, and the WBT-
202 will re-start a new fi le for logging.
Add a Push-To-Log point
Press the (Flag) button to log a Push-To-Log point.
Power Off
Press and hold the (Power) button for 3 seconds to turn off the WBT-202. All LED will
go out.