7
(7) Channel Search
and M
S
C
s
to exit
M
To access the menu, press MENU
select [Channel Search ]. The enu
provides options to adjust the earch hannel settings.
Select an option and press RIGHT/LEFT to adjust the setting .
Press EXIT
the enu.
1 . Auto Search
Search and install all DTV and Radio channels automatically. This option
overwrites all preset channels.
1. Select [Auto Search] and press OK or RIGHT to start the channel search.
2. To cancel channel search, press EXIT.
2. Manual Search
Install new channels manually. This option adds new channels without
changing the current channels list.
1. Select [Manual Search] then press OK or RIGHT. The channel search
screen will appear.
2. Press the RIGHT/LEFT key to select the channel frequency
Enables Antenna Power (approx 5V dc, 100mA) to be connected to the RF IN
socket for use by an external active antenna.
Warning: Do not activate the Antenna Power option unless you are certain
that any devices in the coax line between your TV antenna and set top box
are compatible with passing or operating from 5V dc. If in doubt, consult with
a TV or installation technician.
(8) Time Setting
M
then
M
Press UP/DOWN to s
s
3. Press OK to start searching channels
If a channel is found, it is saved and added to the channels list. If channels
can't be found, then exit the menu.
(3) Country
Select your country of residence.
(4) Antenna power
To access the enu, press MENU
select [Time]. The enu provides
options to adjust the time settings.
elect an option and press RIGHT/LEFT to adjust the
setting . Press EXIT to exit the menu.
(1) Time offset
Select Auto or manual for GMT offset adjustments.
(2) Country Region
Select the Country Region when [Time Offset] is set to Auto.
(3) Time Zone
Select the Time Zone Offset when [Time Offset] is set to Manual.
(4) Auto Standby
If this setting is off, this function does not work. When this setting is on, the
Set Top Box will go into sleep mode after 3 hours of no user-operation.
(9) Option
To access the Menu, press MENU and select [Option]. The menu provides
options to adjust the OSD Language, Subtitle Language and Audio
Language.
Select an option and press RIGHT/LEFT to adjust the setting. Press EXIT to
exit the Menu.
