16
USER’S MANUAL
modulator type.
UHF Channel:
Modulator channel can be
changed from the channel 21 to channel 69.
1.4 Factory Setting
If you want to bring the STB back to the factory
default condition, select Factory Setting item.
Before entering this menu, you must input a
password. The default password is 0000.
Then a warning message will be displayed. To
confirm, select
ok
.
Warning:
On selecting factory default you will
lose all of data and information, which was pre-
viously installed.
1.5 Schedule List
In the menu, you can get the information about
the booked channel. When the booked event
comes, it will start to record or play the booked
channel.
Press OK key to enter the Book Even window to
book channel.
In this window, you can operate as the following:
Event ID:
Press
key to display the sub-menu
and select the ID of recording service. The range
is 1 ~ 15.
Service:
Press OK to enter the service list, and
select the desired service.
Start Time:
Enter the start time by using numerci
keys.
Start Date:
Enter the start date by using numeric
keys.
Duration:
Input the value of the recording
duration.
