Notes on Power states
¡
°
¡
±
18
DVD RECORDER OPERATION
Powering on the unit
Initial Setup Procedure
Only after all connections are complete, connect the
power cord and power on the unit.
1
2
Plug the standard jack end into a wall socket or
power strip.
Press STANDBY on the remote control or front panel
to bring the system out of standby mode. The system
is now ready to use.
There are 3 power states for this unit:
1. OFF
- not connect the power cord. The unit draws no
power and cannot be turned on by the remote control.
2. STANDBY
- the unit has not been taken out of standby
by pressing either the standby key on the remote
control or the standby button on the front panel. The
unit draws a slight amount of power to enable the
remote control receiving circuit.
3. ON -
the standby button on the remote control or the
standby button on the front panel has been pressed.
The unit is ready to use.
Using the Menus
When the unit is first powered on, you'll be prompted to
set the time and date as well as TV Tuner options. You
can always change any of the settings you chosen
during the initial setup later in the DVD recorder's
SETUP MENU.
2
Use the UP/DOWN keys to increase or decrease the
value of a selected field or move to a field above or
below. Use the LEFT/RIGHT keys to move to the
previous or next fields.
Press SELECT to select an option and continue.
Time and Date
Setting the time and date correctly is important, as the timer
recording depends on an accurate setting. The time format
used is 24H. Use the
UP/DOWN
keys to increase or decrease
the time or date and the
LEFT/RIGHT
keys to move to a
different field. When you have done, press SELECT key.
The initial setup is now complete. Remember, any settings
chosen during the initial setup can be changed at any time in
the DVD recorder's SETUP MENU. Press SETUP to exit the
initial setup and begin using your DVD recorder.
D a t e ( m m / dd / y y )
T i m e ( h h : m m : s s )
0 1 / 0 1 / 0 1
2 1 : 4 5 : 2 3
D a t e ( m m / dd / y y )
T i m e ( h h : m m : s s )
0 1 / 0 1 / 0 1
2 1 : 4 5 : 2 3
Press RETURN/EDIT to exit edit mode,
Press UP/DOWN or 0-9 to edit.
SYSTEM SETUP
CLOCK
SYSTEM SETUP
CLOCK
1
Summary of Contents for DVDR-X30
Page 1: ...USER S MANUAL DVDR X30 ...