WINTACT WT63A, User Manual, Page: 7 / 10

-10-
LO/HI
m/s
m/s
A. press the key to select high frequency (HI) or low
frequency (LO) , as shown in following figure:
Note:
High/low frequency selection is only available in
acceleration measurement mode.
Low frequency
(10Hz~1KHz)
High frequency
(1KHz~15KHz)
Select High/low Frequency:( High frequency
is only for acceleration measurement mode)
-11-
MEAS
/ON
m/s
m/s
mm/s
As per the to-be-measured and frequency of vibration
structure, select corresponding measurement mode
(Acceleration/ Velocity/ Displacement) and frequency
(HI/LO frequency). Keep the " " key depressed with
your right thumb, press the vibration meter against the
measurement object at a force of 500g to 1kg, the result
is displayed on the LCD screen. Release the key and the
result is held on the LCD screen. As shown in following
figure:
Low
frequency
Acceleration
measurement
High
frequency
Acceleration
measurement
Velocity
measurement
Measurement