WinSystems SYS-ITX-N-3900 Product Manual Download Page 46

Page: 46 / 53

SYS-ITX-N-3900/BIOS Settings

v1.0

www.winsystems.com

Page 46

CSM Support [Enabled]

Launch Storage OPROM:

Control the execution of UEFI and legacy

storage OpROM. Choices: UEFI (Default), Do not launch, Legacy

OS Selection:

[Default] To Win8/8.1/10; [Other] Android/Linux; [Legacy

System] Win7/DOS; This item setting affects LPSS and XHCI hand-off item

setting. Choices: Default (Win8/8.1/10), Others, Legacy System, Intel Linux

Full Screen Logo:

Enable/disable Quiet Boot option and full-screen Logo.

Choices: Disabled (Default), Enabled

Boot mode select:

Select boot mode LEGACY/UEFI. Choices: UEFI

(Default), Legacy

FIXED BOOT ORDER Priorities

Boot Option #1:

Set the system boot order. Choices: Hard Disk (Default),

USB Device, CD/DVD, Network, Disabled

Boot Option #2:

Set the system boot order. Choices: USB Device (Default),

Hard Disk, CD/DVD, Network, Disabled

Boot Option #3:

Set the system boot order. Choices: CD/DVD (Default),

USB Device, Hard Disk, Network, Disabled

Boot Option #4:

Set the system boot order. Choices: Network (Default),

CD/DVD, USB Device, Hard Disk, Disabled

Warning

The operating system (OS) may not boot if this setting is changed after the OS

is installed.

Summary of Contents for SYS-ITX-N-3900






















































Search results

Summary of Contents for SYS-ITX-N-3900

Reviews:

Related manuals for SYS-ITX-N-3900

Brands by name

Popular brands

WinSystems SYS-ITX-N-3900, Product Manual

Search results

Summary of Contents for SYS-ITX-N-3900

Reviews:

Related manuals for SYS-ITX-N-3900

Brands by name

Popular brands