background image

110425 

 

 

 

OPERATIONS MANUAL PCM-UIO48B 

 

 

 

 

33

WARRANTY REPAIR INFORMATION

WARRANTY

WinSystems warrants to Customer that for a period of two (2) years from the date of 

shipment any Products and Software purchased or licensed hereunder which have been 

developed or manufactured by WinSystems shall be free of any material defects and shall 

perform substantially in accordance with WinSystems’ specifications therefore.  With respect 

to any Products or Software purchased or licensed hereunder which have been developed or 

manufactured by others, WinSystems shall transfer and assign to Customer any warranty 

of such manufacturer or developer held by WinSystems, provided that the warranty, if any, 

may be assigned.  Notwithstanding anything herein to the contrary, this warranty granted by 

WinSystems to the Customer shall be for the sole benefit of the Customer, and may not be 

assigned, transferred or conveyed to any third party.  The sole obligation of WinSystems for 

any breach of warranty contained herein shall be, at its option, either (i) to repair or replace 

at its expense any materially defective Products or Software, or (ii) to take back such Products 

and Software and refund the Customer the purchase price and any license fees paid for the 

same.  Customer shall pay all freight, duty, broker’s fees, insurance charges for the return of 

any Products or Software to WinSystems under this warranty.  WinSystems shall pay freight 

and insurance charges for any repaired or replaced Products or Software thereafter delivered 

to Customer within the United States.  All fees and costs for shipment outside of the United 

States shall be paid by Customer.  The foregoing warranty shall not apply to any Products of 

Software which have been subject to abuse, misuse, vandalism, accidents, alteration, neglect, 

unauthorized repair or improper installations. 

THERE ARE NO WARRANTIES BY WINSYSTEMS EXCEPT AS STATED HEREIN, THERE ARE NO 

OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IN NO EVENT 

SHALL WINSYSTEMS BE LIABLE FOR CONSEQUENTIAL, INCIDENTIAL OR SPECIAL DAMAGES 

INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF DATA, PROFITS OR GOODWILL.  

WINSYSTEMS’ MAXIMUM LIABILITY FOR ANY BREACH OF THIS AGREEMENT OR OTHER CLAIM 

RELATED TO ANY PRODUCTS, SOFTWARE, OR THE SUBJECT MATTER HEREOF, SHALL NOT 

EXCEED THE PURCHASE PRICE OR LICENSE FEE PAID BY CUSTOMER TO WINSYSTEMS FOR 

THE PRODUCTS OR SOFTWARE OR PORTION THEREOF TO WHICH SUCH BREACH OR CLAIM 

PERTAINS.

WARRANTY SERVICE

1. 

To obtain service under this warranty, obtain a return authorization number.  In the 

United States, contact the WinSystems’ Service Center for a return authorization number.  

Outside the United States, contact your local sales agent for a return authorization number.

2. 

You must send the product postage prepaid and insured.  You must enclose the products 

in an anti-static bag to protect from damage by static electricity.  WinSystems is not responsible 

for damage to the product due to static electricity.

Summary of Contents for PCM-UIO48B






































Reviews: