ITX-M-CC452-T10/Configuration
v1.0
www.winsystems.com
Page 19
6.5.7 SW3 - Power Button
The ITX-M-CC452-T10 turns on automatically when power is applied to the
computer and does not require the power button to be pressed.
The power button connector can be used to wake the computer after
shutdown, sleep, or system standby if power is not removed. A
momentary switch that shorts the power pin and GND pin together
activates the power button input.
This power button also functions with operating system power options,
such as safely shutting down the computer or putting the computer to
sleep.
Holding the power button for roughly 5 seconds performs a hard reset to
the computer.
6.5.8 J1, SW1 - System Reset Button
The system reset button (SW1) instantly performs a hard reset to the
computer. An external momentary switch attached to
J1
performs the
same function.
NOTE To avoid potential operating system corruption, use the reset button only
when the computer cannot safely shut down or restart due to a software
crash or hardware fault. If the reset button operation is desired, an OS
write protect filter is highly recommended.
6.5.9 J2 - Lid
Shorting the two lid header pins together mimics closing a laptop screen.
This power function is configurable in your operating system.
6.5.10 SW2 - Sleep Button
The sleep button places the system to sleep. This power function is
configurable in your operating system.
6.5.11 J18 - M.2 Socket 3, with M Key, Type 2280 NVMe
The M.2 SSD socket provides support for M Key, type 2280 NVMe (PCIE 3.0
x4) storage devices.
6.5.12 J6 - Mini PCIe #3 Connector with mSATA Support
The ITX-M-CC452-T10 Mini PCIe socket supports a variety of peripherals as
available in this format. This Mini PCIe socket supports PCIe, USB 2.0, and
mSATA channel.
6.5.13 J9 - SATA 3 (6 Gbps)
The ITX-M-CC452-T10 supports one SATA 3 (6 Gbps) interface.
