WinSystems EBC-BX, Operation Manual

Page: 47 / 101

3.7 In te grated Pe riph er als Setup
The op tions in this sec tion al low for con trol of the in te grated pe riph er als, i.e. Floppy and IDE con -
trol lers, se rial ports, and the par al lel port.
IDE 1st Chan nel Ca ble
This op tion al lows for speci fi ca tion of the ca ble type at tached to the Pri mary IDE chan nel. The
choices are :
40 Pins
80 Pins
Page 3 - 14 OPERATIONS MANUAL EBC-BX 030923
WinSystems - "The Embedded Systems Authority"
Phoenix - Award BIOS CMOS Setup Utility
Integrated Peripherals
IDE 1st Channel Cable [40 Pins]
IDE 2nd Channel Cable [40 Pins]
IDE Primary Master PIO [Auto]
IDE Primary Slave PIO [Auto]
IDE Secondary Master PIO [Auto]
IDE Secondary Slave PIO [Auto]
IDE Primary Master UDMA [Auto]
IDE Primary Slave UDMA [Auto]
IDE Secondary Master UDMA [Auto]
IDE Secondary Slave UDMA [Auto]
On-Chip Primary PCI IDE [Enabled]
On-Chip Secondary PCI IDE [Enabled]
USB Keyboard Support [Disabled]
Init Display First [AGP]
IDE HDD Block Mode [Enabled]
Onboard FDC Controller [Enabled]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Serial Port 2 [2F8/IRQ3]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [ECP+EPP1.9]
ECP Mode Use DMA [3]
↑ ↓ → ←
: Move Enter : Select PU/PD/+/- : Value F10 : Save ESC : Exit F1 : General Help
F5 : Previous Values F6 : Fail-Safe Defaults F7 : Optimized Defaults
Item Help
Menu Level