Antenna Systems
We love feedback. Please like our page on Facebook and send us an e
-
mail with your thoughts or a photo of your new installa-
tion at
. We will try to make sure your photo makes it onto our page.
12.
The final connection of the caravan cable to the lower point on the signal booster can now be made. As before, tighten
firmly, slide the rubber boot in place.
13.
Remove the backing from the alignment decal, and install this on the bottom of the directional handle over the existing
sticker.
Note: The home arrow head should be aligned with the pointer on the directional handle
ROUTING THE BROADBAND CABLE
14.
Insert the provided clear plastic firtree cable tie retainer into the free pivot (below left).
15.
Route the broadband antenna cable as shown (below left) and fasten with the provided cable tie.
16.
The coaxial cables for both the Television antenna, and the broadband antenna may now be retained with the provided
cable ties as show in the figure (below right). In each case the cable ties should fasten both cables to the black retainers
firmly.
The installation is now complete. Return to the inside of the van, fully raise the antenna and orient toward the signal source.
Make sure the power supply (240v AC or 12v DC) is switched on, and remember to retune your TV, as you should now be re-
ceiving more channels in both the vertical and horizontal planes.
Your broadband antenna is omni
-
directional, and as a consequence does not require orientation. In this way the need to aim
the TV antenna toward the nearest transmitter will not affect the mobile broadband performance.
Warranty
Your Winsig Camping Antenna features a 12 Month Warranty. Please remember to register your product online at
http://www.winsig.com.au/warranty
-
registration.
Fir tree cable tie retainer
Cable ties around both cables
