Zhengzhou Winsen Electronics Technology Co., Ltd
www.winsen-sensor.com
Tel: 0086-371-67169097/67169670
Fax: 0086-371-60932988
Email: [email protected]
Blowhole of the sensor should not be blocked and polluted, which will cause the sensitivity
decrease.
Excessive impact or vibration should be avoided.
Do not use the sensor when the shell is damaged.
It takes some time for the sensor to return to normal state After applied in high concentration gas.
Do not take apart the sensor, otherwise electrolyte leakage can cause sensor damage.
Working electrode and reference electrode of the sensor shall be in short circuit when stored.
To preheat over 48hs before using and soldering forbidden.
Note: To keep continual product development, we reserve right to change design features without
prior notice!
Zhengzhou Winsen Electronics Technology Co., Ltd
Add.:
NO.299 Jin Suo Road, National Hi-Tech Zone,
Zhengzhou, 450001 China
Tel.:
0086-371-67169097 / 67169670
Fax.:
0086-371-60932988
E-mail:
Website: