8-5
SECTION 8 -
ENTERTAINMENT
TV ANTENNA
The TV antenna on your motor home can be
easily raised, rotated a full 360
°
and lowered
from inside the vehicle by simply turning a crank
or directional handle. A built-in signal amplifier
designed to strengthen signals, is controlled by a
power switch built into the optional video
selection box or on a wall plate assembly.
See the antenna manufacturer’s operation,
care, and maintenance information in your
InfoCase.
Raising Antenna to Operating
Position
Turn elevating crank clockwise in “UP”
direction until some resistance to turning is noted
(approximately 13 turns). Antenna is now in
operating position.
Turn amplifier power switch “ON” to receive TV
signal.
Rotating Antenna for Best Picture
Make sure antenna is in the “UP” position.
Pull down on directional handle using both hands
until it disengages ceiling plate and rotate for best
picture and sound on TV set.
Lowering Antenna to Travel
Position
Rotate antenna until pointer on directional
handle aligns with pointer on ceiling plate.
Turn elevating crank (counter-clockwise) in
“DOWN” direction until resistance is noted
(approximately 13 turns). Antenna is now locked
in travel position. Turn amplifier power switch
“OFF”.
WARNING
Never allow the antenna to touch
electrical power lines or any other
electrical wires.
Bedroom DVD/Satellite
Receiver Connection
-Typical View
CAUTION
To avoid equipment damage, always
align directional handle to DOWN position
before lowering. Never partially raise or
lower antenna. Antenna must be raised
fully up into operating position or lowered
fully down into travel position.