11-7
SECTION 11 –
MISCELLANEOUS
ENTRY STEP – ELECTRIC
–If Equipped
The control switch for the electric entry step is
located inside the sliding door.
Automatic Retraction Feature
The step is equipped with an automatic
retraction feature that stores the step
automatically if the Ignition Switch key is turned
to the On or Run positions.
This feature is intended to prevent injury or
damage by an extended step while the vehicle is
moving.
Further Information
For additional information on the step, see the
manufacturer’s operators manual included in
your InfoCase.
AWNING – POWER
–If Equipped
The Power Awning switch and Awning Light
switch is located at the front of the galley. For
your convenience, a Second Power Awning
switch is located on the right side of the
passenger seat.
WARNING
Do not use step unless fully extended.
Do NOT stand on step when vehicle
ignition switch is turned to either the “On”
or “Start” position.
The step will automatically retract, which
may cause personal injury.
Entry Step
(Located near sliding door)
-Typical View
(Extended position shown)
Entry Step Switch
(Located near sliding door)
-Typical View
NOTICE
The leading edge of the awning may hit
the top of the sliding door if the door is
open while extending or retracting the
awning.
Power Awning and Awning Light Switch
(Located at front of galley or shower wall)
-Typical View