![background image](http://html1.mh-extra.com/html/winnebago/tour-2012/tour-2012_operators-manual_987524048.webp)
SECTION 3 –
DRIVING YOUR MOTOR HOME
3-24
4. Remove step cover screws and set aside.
NOTE: When removing the step cover, there are
screws that need to be removed. These
screws are found by feeling around the
top edge of the step cover carpet
(approximately two on each side).
•
If your bed is equipped with a front panel,
there are two screws that need to be removed
in order to take off the step cover (after front
panel is removed).
5. Remove step cover and set aside.
6. Remove fasteners from Metal Engine Covers
and set covers aside.
You have now accessed the engine.
7. Reverse steps to reinstall Engine Access
Covers.
Aluminum Tube
Steel Frame
Step Cover Screw Locations
(Shown with Metal Engine
Covers removed)
-Typical installation shown
Remove two screws attaching bed board
frame to step cover (if equipped)
-Typical installation shown