SECTION 8
APPLIANCES & INTERIOR FEATURES
8-2
Normal vehicle leveling to provide comfort
for the occupants is satisfactory for refrigerator
operation. This will be well within the operation
limits of 3
°
off-level side-to-side and 6
°
off-level
front-to-back.
OPERATING INSTRUCTIONS
Standard Norcold 9000-Series models with
Electric Auto Mode Control
The control panel is located between the freez-
er compartment and fresh food compartment. It
contains pressure sensitive touch switches and a
digital display. A backlight illuminates the dis-
play for 10 seconds whenever any of the control
buttons is pressed.
The ON/OFF button turns the refrigerator on
or off. If the button is pressed, it will turn the
refrigerator on and set the mode to auto. When
the refrigerator is on, pressing this button for 2
seconds will turn the refrigerator off.
Pressing and holding the MODE button
allows the user to cycle through the three mode
choices; one AUTO and two manual modes
(AC, LP GAS). The refrigerator will not switch
to the new operating mode until the mode button
is released.
The SET TEMP (thermostat) button controls
the refrigerator and freezer temperature during
both gas and electric operation, eliminating the
need to reset each time a different power source
is selected. Press and hold the SET TEMP button
to select the desired temperature setting. The
temperature settings are shown in the form of a
number in the display window, with the number
9 indicating the coldest setting.
Start-Up Instructions - Auto Mode
When the AUTO mode is selected, the oper-
ating control automatically selects the power
source using the following priority scheme:
•
First, the auto mode system will ‘seek’ to
find AC power available. At this time ‘AU’
will appear in the display window.
Push door handle downward and pull to open
refrigerator. (Lift freezer handle upward.)
Slide tabe outward to prop door open for
storage ventilation
