SECTION 4 –
APPLIANCES AND SYSTEMS
4-2
•
To start up the refrigerator, press Mode button
for 2 seconds. The previously selected
operating mode is displayed (e.g. 120, which
means 120V).
•
Press Mode again and you may change the
operating mode to:
AU (Automatic Energy Selection)
or manually change to
120V, 12V, or Gas
NOTE: The 12V DC operation is only
operational while the engine is running.
AES Mode (Automatic Energy
Selection)
When in this mode, the refrigerator
electronics automatically selects one of the three
energy types (120V, 12V, or Propane Gas). The
control electronics automatically ensures that the
refrigerator is supplied with the optimum source
of energy in each case.
For more information on AES, please refer to
your refrigerator operating instructions included
in your InfoCase for complete details.
•
Temperature Setting -
Start at the “coldest”
setting to ensure coldest temperature in the
freezer compartment, then adjust warmer as
necessary after cold* food has been added.
* The refrigerator will retain temperature more
efficiently if food is cold before placing inside.
Removing Freezer to Expand
Refrigerator Space
1. Release the freezer by unlocking the bottom
latches on each side of the freezer.
2. Pull the freezer out.
3. You now have a full-functioning refrigerator
with expanded space.
Reverse steps to re-install the freezer, making
sure to re-lock the bottom latches for security.
Further Information
For further information and operating
cautions, see the refrigerator operating
instructions included in your InfoCase.
REFRIGERATOR SERVICE
ACCESS COMPARTMENT
(Exterior)
The exterior refrigerator service compartment
allows access to the rear of the refrigerator for
inspection, maintenance, and service.
To Open
1. Use a screwdriver or coin to turn the latch
knobs to the vertical position.
