SECTION 9 –
MISCELLANEOUS
9-6
Closing the Windows
To close window, extend all the way out (past
the second notch setting) and the window will
retract. Grab one of the window latches and pull
window toward you and secure all three latches
into locked position.
POWER ROOF VENTILATOR
(Bath)
To Operate Ceiling Ventilator
1. To open the ventilator dome, push upwards on
the Fan Lift Bar.
2. Press the Fan Power Switch to operate.
3. When finished using the roof ventilator, press
the Fan Power Switch to stop operation.
4. Pull the Fan Lift Bar down to close dome.
POWER ROOF VENTILATOR
The Power Roof Ventilator features a rain
cover, electric lift, and thermostat operation with
exhaust airflow.
The vent is controlled by a switch on the wall,
remote, or keypad controls on the fan.
NOTE: In event of power failure, the ventilator
dome may be opened or closed manually
using the Dome Crank knob.
•
ON/OFF
–
Press to turn the fan on or off. The
vent lid will open automatically when the fan
is turned on and close when the fan is turned
off.
•
IN/OUT
–
Press to reverse the direction of the
fan. The fan will slow down and pause for two
(2) seconds before resuming operation in the
opposite direction.
•
AUTO
–
Press to enter Auto Mode. You will
hear three (3) quick beeps to confirm the fan
is in Auto Mode. To exit Auto Mode, press the
On/Off button.
•
ARROW
–
In Auto Mode press the +/- arrow
buttons to adjust thermostat temperature up or
down. Press the +/- arrow buttons at the same
time to open or close the vent lid.
NOTE: For best results, close all other roof
vents, windows, and doors, then open
one (1) window the farthest distance
from the roof ventilator. The fan speed
selector allows you to control the amount
of circulation you need at any time.
Power Roof Ventilator
Fan Power Switch
Fan Lift Bar
Power Roof Ventilator
Arrow
Auto
In/Out
On/Off
Dome Crank