SECTION 7 –
FURNITURE AND SOFTGOODS
7-2
3. Push the DOWN arrow to lower the Loft Bed.
•
Maximum Capacity: 500 lbs.
•
To avoid injury to young children, do not
leave them unattended on the bunk.
NOTE: This low bunk design may be accessed
without the use of a ladder. If needed, a
multi-purpose step stool may be used.
To store the Loft Bed
1. Push the UP arrow until the Loft Bed reaches
the ceiling.
2. Turn the key (located near the loft bed or
monitor panel, depending on model) to the
“OFF” position.
3. Fasten the safety belt whenever the bed is in
the stored position.
Manual Retraction of Loft Bed
If the Power Loft Bed is malfunctioning you
may need to manually retract the loft bed.
1. Remove screws from bottom bunk panel.
Remove panel and set aside.
2. Remove Loft Bed manual retractor from
InfoCase.
3. Insert manual retractor into loft bed motor (as
shown) and turn clockwise to raise the loft bed
into stored position.
WARNING
Keep people away from operating
mechanism and pinch hazard areas
during use. Failure to do so could cause
injury.
