![background image](http://html1.mh-extra.com/html/winnebago/minnie/minnie_owners-manual_987498043.webp)
2-19
SECTION 2
DRIVING YOUR MOTOR HOME
4. The slotted end of the tool must engage with
the pin in the endshaft on the slideout gear
assembly. See arrow in close-up detail.
5. Crank the ratched wrench clockwise (to the
right) to retract the room. The tool will
extend nearly a foot out of the bed base at
first, but will be drawn into the bed base as
the room is retracted. This is a slow process
that will take some time and quite a few
turns of the wrench.
6. As the room retracts, the bed base will move
away from the gear endshaft, which will
eventually cause the tool to lose of contact
with the shaft. When this happens you must
raise the bed, remove the access cover to
access the gear endshaft, and continue using
the wrench and hex shaft only as shown.