![background image](http://html1.mh-extra.com/html/winnebago/impulse-24v/impulse-24v_user-manual_987488112.webp)
SECTION 9 –
FURNITURE AND SOFTGOODS
9-10
•
Push the Murphy Bed Switch DOWN to lower
the bed until the bed is in the fully down
position.
2. The bed is now ready for use.
3. Reverse steps to raise the Murphy Bed.
Manually Raise the Murphy Bed
If the Murphy Bed is malfunctioning you may
need to manually raise the Murphy Bed.
•
Lift the mattress slightly and unlatch the (4)
four mattress straps from the bed frame slats.
Remove the mattress from bed and set aside.
•
Remove (4) screws from drive belt roller
(located on the bottom side of mattress).
•
Reattach mattress straps to bedframe slats.
•
Manually lift the Murphy Bed into the stored
position.
•
Tie belt to sofa frame to secure.
DINING TABLE
–If Equipped
(Typical View – Your coach may differ in
appearance)
•
Remove dining table and pedestal leg from
bathroom storage cabinet.
Murphy Bed Switch
(Located on forward bath wall)
WARNING
Raise Murphy Bed before retracting slide
rooms. Failure to observe can cause
injury and will cause equipment damage.