background image

 

 

USE AND ADJUSTMENT

 

When the Hera II chair is going through corridors or over doorsteps (max. height 5 cm.) it is 

best to pull the chair, thus ensuring maximum stability.  

Note! 

Ensure that the user keep his/her hands inside the armrest when going through doors 

 

and corridors. The user should sit calmly during this kind of movement.

 

 

Using the tilt function 

Hera II chair can be adjusted from +5° (forwards) to -30° (backwards). 
Activate the tilt function by pulling the cable lightly upward and tilt the chair to the desired 

position. 

 

Note! 

This operation requires less effort if you push against one of the back legs with your foot 

 

whilst activating the handle.

 

 

Adjusting the accessories of Hera II 

The chair should be adjusted to the individual user on delivery.

 

Setting the seat height

Setting the seat height is carried out without tools.  
It is not meant to be used on a daily basis.  

1)

 

Release the spring-loaded screw (A) on both sides and 

turn these so that they rest against the outer surface. 

2)

 

The seat can now be raised until the desired height is 

reached. 

3)

 

Turn the spring-loaded screw so that it engages again. 

 

 

Warning: 

The spring-loaded screw MUST be engaged before using the 

 

chair again. 

Foot supports:

 

1)

 

Remove the clips and adjust the foot support to the 

required height. 

 

2)

 

Click the clips on.

 

3)

 

If the foot supports can be angled, the support can be 

pulled out to the required angle and will lock 

automatically.

 

 

 

 

 

Summary of Contents for Hera II/140













Reviews: