Winmate V270, User Manual

Page: 16 / 56

V270 Motherboard User Manual
7
2.2 I/O Equipment Installation
2.2.1 12V DC-IN
The Motherboard allows plugging 12V DC-IN jack on the board without another
power module converter under power consumption by VIA C7-M NanoBGA2
processor in VX700 chipset.
2.2.2 PS/2 Keyboard and PS/2 Mouse
The Motherboard provides one Mini-DIN connector supports PS/2 interface.
Mini-DIN connector supports Keyboard or Mouse. In other cases, especially in
embedded applications, a mouse is not used. Therefore, the BIOS standard setup
menu allows you to select*
“
All, But Keyboard” under the “Halt On”. This
allows no-keyboard operation in embedded system applications without the
system halting under POST.
2.2.3 Serial COM ports
One serial connector build in the rear I/O supports RS232/422/485 selection
through jumper setting and three internal RS-232 ports pin-header. When an
optional touch-screen is ordered with PPC, serial com port can connect to a serial
or an optional touch-screen.
2.2.4 Internal VGA
The Motherboard has one VGA port that can be connected to an external CRT/
LCD monitor. Use VGA cable to connect to an external CRT / LCD monitor, and
connect the power cable to the outlet. The VGA connector is a standard 15-pin
D-SUB connector.
2.2.5 Ethernet interface
The Motherboard is equipped with one Realtek RTL8110SC chipsets which is
fully compliant with the PCI 10/100/1000 Mbps Ethernet protocol compatible. It
is supported by major network operating systems. The Ethernet ports provide one
standard RJ-45 jacks.
2.2.6 USB ports
Six USB devices (four with pin headers) may be connected to the system though
an adapter cable. Various adapters may come with USB ports. USB usually
connect the external system to the system. The USB ports support hot plug-in
connection. Whatever, you should install the device driver before you use the
device.
2.2.7 Audio Jack ( Pin-header)
The Audio 7.1 channel capabilities are provided by a VIA VT1708A chipset
supporting digital audio outputs. The audio interface includes Mic-in, line-in and
line-out.