User Manual
Chapter 5
Mounting Solutions
10.1” S-Series HMI (Freescale)
46
5.4 Optional Mounting Solutions
5.4.1 Front Side Wall Mount
You can purchase Front Side Wall Mount Bracket from Winmate as an optional
accessory to 10.1” S-Series HMI.
The device can be mounted in the wall.
Wall cutout: 275 x 184 mm
Screw hole diameter: M4 x 5 mm
Mounting Steps:
1.
Cut a hole in the wall according to the cutout dimensions.
2.
Attach the bezel with clips to the device; fix the bezel with Philips M4x5 screws.
3.
Connect the device to the power source with the power cord.
4.
Install the device properly onto the in-wall cut-out area;
fix the device using the clips.
