21
Chapter 3: Mounting
Chapter 3: Mounting
This chapter provides mounting guide for all available mounting options. Pay attention to cautions
and warning to avoid any damages.
Caution/ Attention
Follow mounting instructions and use recommended mounting hardware to
avoid the risk of injury.
Suivez les instructions de montage et d'utilisation recommandé le matériel de
montage pour éviter le risque de blessure.
Safety Precautions
Observe the following common safety precautions before installing any electronic device:
•Use separate, non-intersecting paths to route power and networking wires. If power wiring
and device wiring paths must be crossed make sure the wires are perpendicular at the
intersection point.
•Keep the wires separated according to the interface. Wires that share similar electrical
characteristics must be bundled together.
•Do not bundle input wiring with output wiring. Keep them separate.
• When necessary, it is strongly advised that you label wiring to all devices in the system.
3.1 Cable Mounting Considerations
For a nice look and safe installation, make sure cables are neatly hidden behind the device.
Caution/ Attention
Observe all local installation requirements for connection cable type and
protection level.
Suivre tous
les règlements locaux d’installations, de câblage et niveaux de
protection.
Caution/ Attention
Turn off the device and disconnect other peripherals before installation.
Éteindre l’appareil et débrancher tous les périphériques avant l’installation.
Alternating Current Mise à le terre !
To prevent electrical shock, the Safety Ground location on the rear must be
bonded to the local earth ground through a minimum 12 AWG wire as short
as possible.
Pour éviter les chocs électriques, l
’emplacement de la prise terre à l’arrière
doit être lié à terre locale, à travers un 12 AWG minimum et aussi court
que possible.