Winmate R15IHWS-MHC3, User Manual

Page: 6 / 102

M-SERIES HMI vi
Safety Precautions
For your safety carefully read all the safety instructions before using the device. Keep this
user manual for future reference.

Always disconnect this equipment from any AC outlet before cleaning. Do not use
liquid or spray detergents for cleaning. Use a damp cloth.

For pluggable equipment, the power outlet must be installed near the equipment
and must be easily accessible.

Keep this equipment away from humidity.

Put this equipment on a reliable surface during installation. Dropping it or letting it
fall could cause damage.

The openings on the enclosure are for air convection and to protect the equipment
from overheating.
CAUTION/ATTENTION
Do not cover the openings!
Ne pas couvrir les ouvertures!

Before connecting the equipment to the power outlet make sure the voltage of the
power source is correct.

Position the power cord so that people cannot step on it. Do not place anything
over the power cord.

If the equipment is not used for a long time, disconnect it from the power source to
avoid damage by transient over-voltage.

Never pour any liquid into an opening. This could cause fire or electrical shock.

Never open the equipment. For safety reasons, only qualified service personnel
should open the equipment.

All cautions and warnings on the equipment should be noted.
* Let service personnel to check the equipment in case any of the following problems
appear:
o
The power cord or plug is damaged.
o
Liquid has penetrated into the equipment.
o
The equipment has been exposed to moisture.
o
The equipment does not work well or you cannot get it to work according
to the user manual.
o
The equipment has been dropped and damaged.
o
The equipment has obvious signs of breakage.

Do not leave this equipment in an uncontrolled environment where the storage
temperature is below -20°C (-4°F) or above 60°C (140°F). It may damage the
equipment.