Winmate R15IHWS-MHC3, User Manual

Page: 27 / 102

USER MANUAL CHAPTER 2 GETTING STARTED
M-SERIES HMI 14
2.2.4 COM2 Serial Port Connector
The M-Series HMI uses D-SUB 9pin connector to connect serial interfaces.
2.2.5 Two USB 3.0 Connectors
M-Series HMI has two USB3.0 connectors. Use USB3.0 connector to connect external
devices such as mouse or keyboard to the HMI device.
2.2.6 VGA Output
Connector
M-Series HMI has VGA connector (D-Sub 15pin Female). Use VGA cable to connect the
display to the PC system.
2.2.7 HDMI Output Connector
Use HDMI A Type19-pin female output connector to connect the HMI device to an
external display.
Pin № Signal Name Pin № Signal Name
1 DCD 2 DSR
3 RXD 4 RTS
5 TXD 6 CTS
7 DTR 8 RI
9 GND 10 GND
Pin № Signal Name Pin № Signal Name
1 +5V 2 USB_D-
3 USB_D+ 4 GND
5 STDA_SSRX- 6 ST
7 GND 8 STDA_SSTX-
9 ST
Pin № Signal Name Pin № Signal Name
1 RED 2 GREEN
3 BLUE 4 ID2/RES
5 GND 6 RED_RTN
7 GREEN_RTN 8 BLUE_RTN
9 KEY/PWR 10 GND
11 ID0/RES 12 ID1/SDA
13 HSync 14 VSync
15 ID3/SCL