19
Chapter 2: Installation
2.3 Connecting Peripherals
This Display comes with USB Type-C interface located on the bottom panel. The connector
comes with protective cap. To ensure the waterproof function can work properly, make sure
that the protective caps and have been securely tightened whenever the connectors are not
used.
Important
Please note that when reinstalling the protective cap, it must be fully tightened to
ensure the unit is properly sealed to meet the IP65 enclosure rating.
For a nice look and safe installation, make sure cables are neatly hidden behind the device.
Caution/ Attention
Observe all local installation requirements for connection cable type and protection
level.
Suivre tous les règlements locaux d’installations, de câblage et niveaux de
protection.
Caution/ Attention
Turn off the device and disconnect other peripherals before installation.
Éteindre l’appareil et débrancher tous les périphériques avant l’installation.
To display video and sound from an external PC follow the instructions below.
1. Turn off your computer and unplug external computer's power cable.
2. Connect a USB 3.1 Type C cable from your external PC to the USB 3.1 Type C port on
the display.
3. Connect the power cable to the display and the other side to power adapter.
4. Plug the power adapter into an electrical outlet.
5. Turn on external computer and display.
