25
M101S Rugged Tablet User Guide
4.4.6.1 Trigger Settings
You can define the barcode scanner trigger mode from trigger mode options drop-down menu shown as
below.
Trigger mode options
Trigger Mode
Description
Continuous
Under
Continuous
mode, the barcode scanner processes auto-scan
continuously. The scanning light and pattern will be always on.
Level
Under
Level
mode, the barcode scanner follows trigger button behavior. The
scanning light will be on when the Fn2 button is triggered, and off when the
barcode is successfully read or the Fn2 button is released.
Pulse
Under
Pulse
mode, user can define the scanning time after each trigger. The
scanning light will be on when the Fn2 button is triggered, and off when the
barcode is successfully read or the defined read time ends. To set up the
scanning time, tap on the
Read time options
drop-down menu and choose a
preferred time frame (options from 1 second to 9 seconds).
Flashing
Under
Flashing
mode, the scanning light is flashing, and the barcode
scanner processes auto-scan with the same frequency.
4.4.6.2 Barcode Settings
Item
Description
Sound
The
Sound
check box defines whether a beep sound will come with the data
scanning.
Identifier
Code
The
Identifier Code
check box defines whether to filter Application Identifiers from the
scanned data. Some barcode types, such as EAN-128, use Application Identifiers to
include additional data. User can disable
Identifier Code
check box to ignore specific
characters.
Output
to
Choose the output of the Barcode:
-Keyboard Wedge
-SDK
-Virtual COM
Summary of Contents for M101S
Page 53: ...52 Chapter 5 Frequently Used Settings 6 Make sure your device is connected to the Computer...
Page 57: ......
Page 58: ......
Page 59: ......