M101B User Guide
17
Useful Information
Barcode Scanner Configuration (Code Type Selection)
For M101 tablet computer equipped with the optional barcode scanner, this section of user
manual explains how the barcode scanner can be configured differently via software (Intermec
EasySet) to read different standards of barcode types. The barcode scanner is configured with
Intermec EasySet application. The latest version can be downloaded at the following link:
http://intermec.custhelp.com/app/answers/detail/a_id/5760
Barcode Scanner Configuration Instruction
In order to configure the barcode scanner, the tablet device needs to be restarted to reset the
hardware devices on-board to allow for configuration.
Note:
Throughout the barcode scanner configuration,
DO NOT
try and trigger the barcode
scanner by press the
Function
button on the device. Doing so will prevent the barcode
scanner from being correctly configured.
Perform the following to configure barcode scanner for different code types:
1. Turn-off all the running applications and restart the tablet.
2. Once the tablet boots up, wait for the HotTab utility to start up.
3. Open HotTab utility, and tap on the “
Device
” icon.
4. Turn on the “
Barcode
” device by tapping on the Icon. Make sure the “
Barcode
” icon is
orange to indicate barcode scanner is on.
DO NOT
try and trigger the barcode scanner by
press the
Function
button on the device at this point. Doing so will prevent successful
configuration.
5. Execute the “
Easyset
” barcode scanner configuration application by tapping on its icon:
