Winmate M-Series, User Manual

Page: 52 / 112

USER MANUAL CHAPTER 4 AMI UEFI BIOS SETUP
- 52 -
BIOS Setting Description Setting
Option Effect
Legacy USB
Support
User can enable
or disable USB
port.
Auto Disable legacy
support if no USB
devices are
connected
Disable Will keep USB
devices available
only for EFI
applications.
Enable Enable all the USB
devices
XHCI Hand
‐
off This is a
workaround for
OSs without XHCI
hand
‐
off support.
The XHCI
ownership
Change should
claim by XHCI
driver.
Disable Disables this
function
Enable
Enables this
function
EHCI Hand
‐
off This is a
workaround for
OSs without ECHI
hand
‐
off support.
The EHCI
ownership change
should be claimed
by EHCI driver.
*Disabled Disables this
function
Enable Enables this
function
USB Mass
Storage Driver
Support User can Enable
or disable USB
mass storage
driver support. Disable Disables this
function
Enable Enables this
function
USB Transfer
time
‐
out
The time
‐
out value
for control, bulk,
and interrupt
transfers.
1 Sec
5 Sec
10 Sec
*20 Sec Depends on the
time
‐
out value
Device Reset
time
‐
out
USB mass storage
device start unit
command time
‐
out.
10 Sec
*20 Sec
30 Sec
40 Sec Depends on the
time
‐
out value
Device power
‐
up
delay
Maximum time the
device will take
before it properly
reports itself to the
host controller. Auto Uses default value:
for a root port it is
100 ms, for a Hub
port the delay is
taken from Hub
descriptor