Winmate IP70, User Manual

Page: 9 / 88

9 Chapter 1: General Information
1.3 Hardware Specifications
Model Name IP70 Mini-ITX SBC
System Specifications
CPU Intel® Pentium® N4200 Apollo Lake Processor 1.10 GHz,
up to 2.50 GHz with turbo boost technology
Chipset Intel® SOC
System Memory 2 × DDR3L 1866 MHz SO-DIMM ( max. 8GB )
BIOS Insyde BIOS
Graphic Intel® HD Graphics 505, supports DirectX 12 and OpenGL4.3
Audio Codec Realtek HD codec
Ethernet Intel® I210AT Gigabit-LAN Cont I219LM Gigabit-LAN PHY
Display Specifications
Display Interface HDMI resolution up to 3840 x 2160 @ 30 Hz
DP interface, supports max. resolution 4096 x 2160 @60Hz
LVD S24 bit 1920 x 1200@60Hz
I/O Ports Specification
External I/O 4 x USB 3.0
2 x RJ-45 for Giga LAN
1 x DP 1.2
1 x HDMI 1.4b
1 x Audio Jack (Mic-in, Line-out)
1 x (+12V) DC-in Power Jack
1 x Clear CMOS Button
1 x Reset Button
Internal I/O 3 x RS-232 2x5 pin-header
1 x RS-232/422/485 2x5 pin-header
4 x USB 2.0
1 x LVDS by DF-13 40 pin connector
2 x SATA III (SATA2 is only available when M.2 SATA is not in use;
SATA2 and M.2 SATA cannot be used concurrently.)
1 x SATA power by 2x4 pin wafer
2 x -pin-header for speaker(with Amplifier): Left, Right
1 x 14-pin pin-header for DIO
1 x 3-pin digital panel backlight brightness controller
1 x 7-pin inverter
1 x 2x2-pin DC-in 12V connector
2 x 2-pin wafer for +5V external power (Red)
1 x 2-pin wafer for 12V external power (Yellow)
1 x OSD membrane control
1 x eDP panel by JAE-FI-X30S-HF 30p connector (Optional)
1 x 10-pin wafer for VGA output(Optional)