Winmate IF70 Mini-ITX SBC, User Manual

Page: 41 / 96

41 2BChapter 3: Insyde H20 BIOS Setup
BIOS Setting Description Setting Option Effect
Boot
Performance
Mode Configure Boot
Performance Mode
parameters -Max non-turbo
performance
-Max battery
-Turbo Performance Select the performance state
that the BIOS will set starting
from reset vector
Intel SpeedStep
(ta) Configure Intel
SpeedStep (ta)
parameters Enabled/ Disabled Allows more than two
frequency ranges to be
supported
Intel Speed Shift
Technology Configure Intel Speed
Shift Technology
parameters Enabled/ Disabled Enable/ Disable Intel Speed
Shift Technology support.
Enabling will expose the CPP
v2 interface to allow for
hardware controlled P-states
-Turbo Mode Enable or disable Turbo
Mode Enabled/ Disabled Enable/ Disable processor
Turbo Mode (requires EMTTM
enabled too). Auto means
enabled, unless max turbo
ratio is bigger than 16 – SKL
AO W/A
C states Enable or disable
C states Enabled/ Disabled Enable/ Disable CPU Power
Management. Allows COU to
go to C states when it is not
100% utilized
Custom P-state
Table Configure Custom
P-state Table parameters Enter Enters sub-menu
-Number of
P-states Select the number of
custom P-states. [Number] Set the number of custom
P-states. At least 2 states
must be present