17
Chapter 2: Hardware
2.9.2 Suspend
When the device is in Suspend Mode, all LEDs are off. Press the power button to wake up the device
back to ON mode.
2.9.3 Wake Up
When the device is in Wake Up Mode, all LEDs are off.
2.9.4 Turn Off
By default, the FM12Q turns off if the user turns off the device through the system or presses the
power button for 10 seconds with a critical shut down. The FM12Q will also be off when there is no
connection to a power source or the UPS battery is depleted. However, the internal RTC will keep
maintaining the date and time while the device is off.
2.10 Power Control
2.10.1 Power Switch
Power switch is located on the rear side of the
vehicle dock. When the dock is connected to
the external power and the power switch is ON,
the dock delivers power to the FM12Q and the
device can be powered on.
2.10.2 Power Button
Power button is located at the lower right side
of the FM12Q. If the device is OFF, pressing the
power button will start the power up sequence.
Note:
• The
FM12Q has to be docked in a powered vehicle docking station or UPS battery
has to have a sufficient charge to power the device.
• If no external power available and the UPS battery
do not have enough charge,
pressing the power button will cause no action.
