17
Chapter 2: Getting Started
2.1.3 Connecting the Power
Installation Instruction:
1.
Connect a 3-pin terminal block to the HMI connector.
2.
Connect the other side of the terminal block to the AC adapter.
3.
Connect the AC adapter to the power cord.
4.
Plug in the power cord to a working AC wall outlet. The device will boot automatically.
2.2 Connector Description and Pin Assignments
2.2.1 Power Input Connector
The DC power source input of the panel PC is a 2 pin terminal block connector that supports 12-24V DC
power input, maximum current 3.3A.
Pin assignment and connector description of terminal block connector
Note:
Based on the model, terminal block connector may be located either on the bottom or
on the rear side of the HMI device.
Note:
Power cords vary in appearance by region and country.
Voltage
Minimum Voltage 9V
Maximum Voltage 24V
Maximum Current 3.3A
