5
EAC Mini EACFA20 IoT Gateway User Manual
Safety Information
Warning!
Always completely disconnect the power cord from your chassis whenever
you work with the hardware. Do not make connections while the power is on.
Sensitive electronic components can be damaged by sudden power surges.
Only experienced electronics personnel should open the PC chassis.
Warning!
During heavy loading in 50°C environment, the top side of the EAC Mini may
be over 70°C. Please do not touch these parts with your bare hands.
Caution
Always ground yourself to remove any static charge before touching the CPU
card. Modern electronic devices are very sensitive to static electric charges.
As a safety precaution, use a grounding wrist strap at all times. Place all
electronic components in a static-dissipative surface or static-shielded bag
when they are not in the chassis.
Safety Precautions
For your safety carefully read all the safety instructions before using the device. All cautions and
warnings on the equipment should be noted. Keep this user manual for future reference.
*
Let service personnel to check the equipment in case any of the following
problems appear:
o
The power cord or plug is damaged.
o
Liquid has penetrated into the equipment.
o
The equipment has been exposed to moisture.
o
The equipment does not work well or you cannot get it to work according to
the user manual.
o
The equipment has been dropped and damaged.
o
The equipment has obvious signs of breakage.
Do not leave this equipment in an uncontrolled environment where the storage
temperature is below -20°C (-4°F) or above 60°C (140°F). It may damage the
equipment.
Caution
Use the recommended mounting apparatus to avoid risk of injury.
Caution
Do not cover the openings!
Warning!
Only use the connection cords that come with the product. When in
doubt, please contact the manufacturer.
Warning!
Always ground yourself against electrostatic damage to the device.
Summary of Contents for EAC Mini EACFA20
Page 2: ......
