Winmate 7'' S-Series, User Manual

Page: 31 / 104

USER MANUAL CHAPTER 3 OPERATING THE DEVICE
- 31 -
3.3.3 Settings

Sound
The Sound check box defines whether a beep sound will come with the data
scanning.

Output
This setting defines the output type of the scanned data.
Two options are available:

Keyboard Wedge
Under this setting, the data scanned is sent like keyboard data. The scanned data
can be output directly to the demo area below this window, or user can also
open other utility, such as Office Word or Notepad files, for data input.
Note: notice that the input method should support the scanned character.
User can also tap on the Settings button for further details settings.
Item Description
Prefix User can type in this field to define the characters BEFORE the data
scanned.
Suffix User can type in this field to define the characters AFTER the data
scanned.
Append
Enter The check box user can defines to append an “Enter” which is
followed by the characters.
Append
TAB The check box user can defines to append an “TAB” which is
followed by the characters.
Regex
Filter Press on “Presets…” button, user can define how many characters
to show after the data scanned.
Replace User can define specific characters to be replaced with preferred
characters automatically. When the characters defined in
Regex
Substitution is scanned, the data will be replaced with the one
filled in Replace with.
Reset to
default User can remove all the set up and back to default mode.

SDK
For users following SDK for software porting, the scanned data can also be output
with the format needed.