background image

Electronic Humidity Sensor

D-011-0105  Rev D (04/2011)

O

NE

 Y

EAR

 L

IMITED

 W

ARRANTY

Winland  Electronics,  Inc.  warrants  that  each  product  of  its  manufacture  is  free  from  defects  in 
material and factory workmanship, when properly installed and operated under normal conditions 
according  to  the  manufacturer’s  instructions.  Manufacturer’s  obligation  under  this  warranty  is 
limited to correcting, without charge, at its factory any part of parts thereof which shall be returned 
to the factory, by the original retail purchaser, transportation charges prepaid, within one year after 
purchase  and  which  upon  examination  shall  disclose  to  the  manufacturer’s  satisfaction  to  have 
been originally defective. Correction of such defects by repair to, or supplying of replacements for 
defective parts shall constitute fulfillment of all obligations to purchaser. Repair service performed by 
the manufacturer after one year from date of purchase will be for a reasonable service charge. This 
warranty shall not apply to any of the manufacturer’s products which have been subject to misuse, 
negligence or accident of which shall have been repaired or altered outside of the manufacturer’s 
factory. Manufacturer shall not be liable for loss, damage, or expense directly or indirectly from the 
use of its product or from any other cause. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, 
EXPRESSED  OR  IMPLIED.  WARRANTIES  OF  MERCHANTABILITY  AND  FITNESS  FOR  PARTICULAR 
PURPOSE ARE EXCLUDED, AS ARE ALL OTHER REPRESENTATIONS TO THE USER-PURCHASER, AND ALL 
OTHER OBLIGATIONS OR LIABILITIES, INCLUDING LIABILITY FOR INCIDENTAL AND CONSEQUENTIAL 
DAMAGES,  ON THE  PART  OF THE  MANUFACTURER  OR THE  SELLER.  No  person,  agent  or  dealer  is 
authorized to give any warranties on behalf of the manufacturer nor to assume for the manufacturer 
any other liability in connection with any of its products. 

S

PECIFICATIONS

Power Requirements 

12 VDC @10mA

Sensing Element 

Capacitive / IC

Sensing Range 

5% - 95% R.H.

Accuracy 

±5% (10% - 90% RH @ 77° F [25° C])

Response Time 

TC < 12 minutes

Operating Temp 

+32˚ to +152˚F (0˚ to +50˚C)

Weight 

5 oz (0.14 g)

Dimensions 

3.25 x 1.5 x 1” (8.2 x 3.7 x 2.5 cm)

Mounting 

Surface mount

Case Material 

ABS

Warranty 

1 Year Limited 

C

ONTENTS

This package contains:

•  1 HA-III+
•  2 Mounting Screws and 2 anchors
•  1 Installation/Operating Instructions Guide

HA-III+

WEEE Product Recovery/Recycling for EU Customers

In an effort to improve waste management in the European Union, the European Union has enacted 
directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE Directive). According to the 
WEEE Directive, Winland Electronics must take back waste electrical or electronic equipment covered 
under the WEEE Directive, at its cost, for all product it puts on the market after July 1, 2006. The Return 
Process: Contact Winland via our web site at www.winland.com and go to the WEEE link on the home 
page. To request additional information regarding Winland’s RoHS and WEEE compliance initiative and 
how it might impact your business, email [email protected].

HA-III+ Certification Info

Radio Frequency Interference Requirements: This device complies with Part 15 of 
the FCC Rules. Operation is subject to the following two conditions: (1) This device 
may not cause harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation.

CE Marking and European Union Compliance: Products intended for sale within 
the European Union are marked with the CE Mark, which indicates compliance to 
applicable Directives and European Norms (EN). Amendments to these Directives or 
ENs are included:
Electromagnetic Compatibility Directive 89/336/EEC; RoHS Directive 2002/95/EC; 
WEEE Directive 2002/96/EC

Statement of Compliance

Winland Electronics, Inc. hereby declares that this device is in compliance with all the applicable 
Directives, 89/336/EEC, 2002/95/EC, 2002/96/EC.

Symbols on the Product or Manual Labeling

For product disposal, ensure the following:
• Do not dispose of this product as unsorted municipal waste.
• Collect this product separately.
• Use collection and return systems available to you.

 WEEE Waste Electrical and Electronic Equipment
 RoHS Restriction of Hazardous Substances

1950 Excel Drive  •  Mankato, MN  56001 USA

(Tech Support 8:00am - 5:00pm CST)

(800) 635-4269  •  (507) 625-7231 P •  (507) 387-2488 F

www.winland.com

Summary of Contents for HUMID-ALERT HA-III+

Page 1: ...oz 0 14 g Dimensions 3 25 x 1 5 x 1 8 2 x 3 7 x 2 5 cm Mounting Surface mount Case Material ABS Warranty 1 Year Limited CONTENTS This package contains 1 HA III 2 Mounting Screws and 2 anchors 1 Installation Operating Instructions Guide HA III WEEE Product Recovery Recycling for EU Customers In an effort to improve waste management in the European Union the European Union has enacted directive 2002 ...

Page 2: ...e delay unless your application requires instant notification Installation The HA III sensor should be flush mounted directly to a flat surface like a wall The sensor should be located in an area free from drafts heat sources and direct sunlight It is recommended that the sensor is mounted at a height of 4 5 1 2 1 5 m from the floor To begin installation of the HA III you must first remove the cover Do...

Page 3: ...e delay unless your application requires instant notification Installation The HA III sensor should be flush mounted directly to a flat surface like a wall The sensor should be located in an area free from drafts heat sources and direct sunlight It is recommended that the sensor is mounted at a height of 4 5 1 2 1 5 m from the floor To begin installation of the HA III you must first remove the cover Do...

Page 4: ...oz 0 14 g Dimensions 3 25 x 1 5 x 1 8 2 x 3 7 x 2 5 cm Mounting Surface mount Case Material ABS Warranty 1 Year Limited CONTENTS This package contains 1 HA III 2 Mounting Screws and 2 anchors 1 Installation Operating Instructions Guide HA III WEEE Product Recovery Recycling for EU Customers In an effort to improve waste management in the European Union the European Union has enacted directive 2002 ...

Reviews: