User Manual of Network Speed Dome
45
The router must support the route advertisement function if you select
Route
Advertisement
as the IPv6 mode.
6.3.2
Configuring Port Settings
Purpose:
If there is a router and you want to access the speed dome through Wide Area
Network (WAN), you need to forward the 3 ports for the speed dome.
Steps:
1.
Enter the Port Settings interface:
Configuration > Basic Configuration >
Network > Port
Or
Configuration > Advanced Configuration >
Network > Port
Figure 6-9
Port Settings
2.
Set the HTTP port, RTSP port and port of the speed dome.
HTTP Port
: The default port number is 80.
RTSP Port
: The default port number is 554.
HTTPS Port
: The default port number is 443.
SDK Port
: The default port number is 8000.
3.
Click
to save the settings.
6.3.3
Configuring PPPoE Settings
Purpose:
If you have no router but only a modem, you can use Point-to-Point Protocol over
Ethernet (PPPoE) function.
Steps:
1.
Enter the PPPoE Settings interface:
