User Manual of Network Speed Dome
13
the internet.
Figure 2-4
Accessing the Speed Dome through Router with Static IP
Connecting the network speed dome with static IP directly
You can also save the static IP in the speed dome and directly connect it to the
internet without using a router. Refer to Section
2.1.2 Detecting and Changing the IP
Address
for detailed IP address configuration of the speed dome.
Figure 2-5
Accessing the Speed Dome with Static IP Directly
2.2.2
Dynamic IP Connection
Before you start:
Please apply a dynamic IP from an ISP. With the dynamic IP address, you can connect
the network speed dome to a modem or a router.
Connecting the network speed dome via a router
Steps:
1.
Connect the network speed dome to the router.
2.
In the speed dome, assign a LAN IP address, the subnet mask and the gateway.
Refer to Section
2.1.2
Detecting and Changing the IP Address
for detailed LAN
configuration.
3.
In the router, set the PPPoE user name, password and confirm the password.
4.
Set port mapping. E.g. 80, 8000 and 554 ports. The steps for port mapping vary
depending on different routers. Please call the router manufacturer for assistance
with port mapping.
Refer to Appendix 2 for detailed information about port mapping.
5.
Apply a domain name from a domain name provider.
6.
Configure the DDNS settings in the setting interface of the router.
7.
Visit the speed dome via the applied domain name.
