To be used control gimbal’ pitch
(4) Trimming Button
Trimming Button is used to adjust left and right control stick middle point, when
control stick middle point is calibrated by a computer, trimming adjustment is
no need .When control stick middle point is tilt and out of control by computer,
Trimming Button will work.
When aircraft works with GPS stabilization mode, hovering position will tilt from
hovering point, adopts Trimming Button until aircraft does not tilt from hovering
point. For example, if aircraft tilts from the head, Trimming Button should be
adjusted backward.
Trimming Adjustment Max: any trimming adjustment channel has max value,
when reaches this max value, remote controller will beep quickly twice..
Trimming Adjustment Middle Point: press trimming key into Middle Value,
beep slowly twice, and it will not bring any effect on the responding control
stick channel. When calibrating remote controller middle point, middle value
must be needed.
Warning: When starting trimming adjustment, land aircraft, after
adjusting, fly again to check effect.
Warning: After adjusting remote controller middle point through
Trimming Button, lock it to avoid being touched.
Warning: Suggest user calibrating remote controller middle point by
