Quick Start Guide
Use the steps below as a guide to quickly set up your camera so it will function using the
factory default settings.
STEP 1
Open camera cover. Press the Battery Chamber Release button. Install 6 C-cell alkaline
batteries. Recommended for use: Duracell
®
or Energizer
®
batteries. Reinsert the Battery
Chamber into the camera until you hear an audible click.
Rechargeable batteries are not recommended.
Do not use lithium batteries.
STEP 2
Insert SD Memory Card (label side up) until you hear an audible click. Camera will not
operate without SD Card. Slide the power switch to ON. Move the Rotary Dial switch to
the SETUP position and set the time and date by pressing the LEFT button until TIME/
DATE appear on screen. Press OK to begin entering the Time and Date, using +/- buttons
to adjust the values and LEFT/RIGHT to move between fields.
STEP 3
Mount Camera in desired location using a mounting
strap or other accessories offered by Wingscapes
(visit www.wingscapes.com for more information on
mounting accessories). Switch the camera to Laser
Aim by sliding the power switch to the corresponding
position. Aim camera using laser projection to
determine target location.
STEP 4
Slide the power switch to the ON position. Turn the
Rotary Dial to the mode of operation desired and
close the cover. The camera will operate using default
settings for the respective mode selected. You may
also customize the settings if desired. Press the Right
(>) button to begin filming.
Page 5
BirdCam PRO User Guide
