Winget Croker CUMFLOW RP100XD, Parts & Operation Manual

Page: 23 / 59

MAINTENANCE AND LUBRICATION
NOTE:
ALWAYS ENSURE APPARATUS IS ISOLATED FROM MAINS SUPPLY BEFORE
COMMENCING MAINTENANCE. IF NECESSARY A ‘PERMIT TO WORK’ SHOULD BE
OBTAINED
DAILY:
Charge the grease points using Total EP2 Grease 2 (or equivalent)
WEEKLY
Lubricate
Racks Apply Open Gear Lubricant (or equivalent)
Pinions Apply Open Gear Lubricant ( or equivalent)
Inspect and top-up if necessary.
1. Star Gear Box Use Total Carter EP460 3.5 litres cap
2. Pan Drive Gear Box Use Total Carter EP460 3.5 litres cap
INSPECT AND ADJUST-MONTHLY
1. Pan Gear and Pinion, grease Open Gear Lubricant (or equivalent), as required.
2. Adjust Star Blades, Fixed Blades and Discharge Blade to the following settings, also
make sure that Blade Fingers are free in their bearings and that the springs are clear of
obstruction.
3. Star Drive Bevel Pinions, remove cover and grease pinions with Open Gear Lubricant
or equivalent as required. Check retaining grub screws and keys are tight.
MIXING BLADE 3mm clear of pan base. Adjust by moving the blade up or down its
finger.
FIXED BLADES 6mm clear of pan base with the leading edge just touching the pan
side. Adjust by moving the blade up or down its finger.